Evacuation diagrams · Canning, Cannington and Welshpool

Evacuation Diagrams in Canning, Cannington and Welshpool

Canning and Cannington mix established schools such as Queens Park Primary School with one of Perth’s biggest industrial and logistics areas in Welshpool and Kewdale. CMG draws evacuation diagrams for both, from a primary school classroom block to a transport depot with multiple sheds and a hardstand muster point.

Local knowledge

From classroom blocks to transport depots

Welshpool and Kewdale sites often have several buildings, shared yards and vehicle movements that make the assembly area the hardest decision on the diagram. CMG surveys the whole site, agrees the muster points with the site manager and draws diagrams for every building and office.

Canning schools have been refurbished over the years and many diagrams still show the old layout. CMG reviews what is on the wall, updates what has changed and keeps the drawings on file.

What Craig provides

For schools and workplaces in Canning and Welshpool, CMG can cover the whole emergency management picture:

Real CMG diagrams

CMG diagrams in Canning and Welshpool and across WA

Queen of Apostles School in Riverton, FPL Solutions in Canning Vale and 224 Star Street in Welshpool, alongside CMG diagrams from across WA.

Evacuation diagram by CMG for Queen of Apostles School (Early Learning Centre), 108 Tribute St E, Riverton

Evacuation diagram by CMG for FPL Solutions, 16 Oban Link, Canning Vale

Evacuation diagram by CMG for 224 Star Street, Welshpool

AS 3745 compliant evacuation diagram designed by CMG Fire and Safety

Evacuation diagram by CMG for Eglinton Beach Primary School (Makuru), 61 Cerulean Drive, Eglinton

Evacuation diagram by CMG for North Metropolitan TAFE, 63 McLarty Ave, Joondalup

Recent local work

Recent CMG work around Canning Vale

Laboratories, colleges and workplaces across the Canning area, drawn to AS 3745-2010 and installed on site.

MPL Laboratories, Canning Vale

Evacuation diagram update for a NATA-accredited commercial laboratory, where clear routes and assembly points matter.

Al-Ameen College

Appointed to review and update the fire evacuation diagrams across the college’s blocks.

Belmont City College

Diagrams for the health centre and campus buildings at this Belmont secondary college.

Trusted locally

Local schools that trust CMG

Every school here has had its evacuation diagrams designed by Craig and CMG. Their drawings are kept on file, so any update is quick.

Interactive self-check

Is your evacuation diagram still compliant?

Six quick checks based on AS 3745-2010 and what Craig sees most often on WA sites.

Does every diagram have a "You Are Here" point that matches where it is mounted?AS 3745-2010 requires the diagram to be oriented to the viewer's position.

Are all current exits and paths of travel shown, with nothing that no longer exists?Blocked, locked or removed doors are the most common failure.

Is the assembly area shown correctly, including any temporary changes?Construction, transportables and new fencing often move it.

Is every extinguisher, hose reel, blanket and alarm point shown where it actually is?Equipment gets relocated during fit-outs and services.

Has the building changed since the diagram was issued?Extensions, new rooms, demountables or a changed use of space.

Is the diagram legible, with a legend, and mounted at the right height?Faded prints and missing legends are non-compliant.

Answer the six checks above

Takes under a minute. We will tell you plainly whether your diagrams are likely to stand up.

Good to know

Common questions

Straight answers grounded in AS 3745-2010 and WA workplace legislation. Anything else, call Craig.

Do you cover Canning and Welshpool?

Yes. CMG is based in Osborne Park and works across the whole of Western Australia. Canning, Cannington and Welshpool are within 25 minutes of the CMG office.

Which buildings in Canning and Welshpool need evacuation diagrams?

Every workplace and facility occupied by people: schools, childcare centres, offices, shops, warehouses, aged care, medical practices, community centres and strata buildings, under AS 3745-2010 and the WHS (General) Regulations 2022.

How quickly can you install diagrams in Canning and Welshpool?

Most sites are surveyed, drawn and installed within a few weeks, faster where CMG already holds the drawings. Ask Craig for a date that suits your site.

When do diagrams in WA need to be updated?

Whenever the building, exits, fire equipment or assembly area change. AS 3745-2010 says the validity period should not exceed five years, so Craig recommends a full review at least every five years. CMG reviews existing diagrams and updates only what needs it.

Talk to Craig

Not sure your diagrams still match the building? Talk to Craig.

Tell Craig what has changed on site and he will tell you plainly whether your diagrams need updating, and quote only for what is actually needed.